Detailed analysis of the working principle of the lotion pump
1. First press--------When we press the ACTUATOR for the first time, the press head drives the sub-stem (SUB-STEM) through the connected main column (STEM) to compress the spring (SPRING) together; in the compression spring During the process, the outer wall of the piston (PTSTON) rubs against the inner cavity wall of the body (HOUSING), prompting the piston to open the discharge hole of the sub-stem (SUB-STEM); The air is discharged through the discharge hole of the sub-column (SUB-STEM) that has been opened;
2. Press reciprocating multiple times to exhaust all the air in the body (HOUSING);
3. Liquid aspiration-------Press the head (ACTUATOR) by hand to pass the main column (STEM), sub-column (SUB-STEM), piston (PTSTON), and common compression spring (SPRING) to the body (HOUSING) After the air inside is exhausted, release the ACTUATOR, the spring (SPRING) loses pressure and moves back (up). At this time, the piston (PISTON) also moves down through the inner wall of the friction body (HOUSING) to move the auxiliary column The discharge hole of (SUB-STEM) is closed; at this time, the liquid storage chamber in the body (HOUSING) forms a vacuum suction state, suck up the glass ball (BALL), and suck the liquid in the bottle through the suction tube (DIPTUBE) Inside the body (HORSING) reservoir.
4. Store liquid ------Press the head several times, and store the liquid in the main body through repeated suction until the liquid is full.
5. Liquid discharge-----------When the liquid in the liquid storage chamber of the body (HOUSING) is full, press the head (ACTUATOR) again, and the liquid will pass through the discharge hole directly from the mouth (ACTUATOR) spray